Arc 127

Arc 127 Quick Start Guide

Every step links to its own moment in the videos, so you never hunt for the right part again.

  • 45 steps
  • 269 instructions
  • 7 videos
  • 7 chapters
  • Updated 2026-04-16
User manual — Arc 127PDF · English · 9 pages · 0.5 MB

1. Quick Start Guide

Locate the Quick Start Guide Resources

  1. 0:02Overview and Purpose
  2. 1:26Store the Quick Start Guide
Written steps 3

Overview and Purpose

Watch this part0:02
  1. Watch the setup video series step by step to ensure proper setup and minimize downtime.
  2. Pause or rewind the videos as needed to follow the instructions accurately.

Locate the Quick Start Guide

  1. Locate the USB drive included with your printer.
  2. If the USB drive is missing or its contents are unavailable, check the email received from the dealer where the printer was purchased.
  3. Find the Quick Start Guide URL link provided in that email.
  4. Double-click the Quick Start Guide PDF file.
  5. Click on Important Resources.
  6. Download the Quick Start Guide PDF.
  7. Save a copy of the PDF to your desktop.

Store the Quick Start Guide

Watch this part1:26
  1. Confirm the Quick Start Guide is a one-page PDF containing QR codes and links to all required setup resources.
  2. Store the file in an easily accessible location.
  3. Proceed to the next setup video.

2. How to Setup

Arc 127 Cutter Uncrating and Initial Assembly

  1. 0:00Required Tools and Warranty Notice
  2. 0:50Remove Side Panels
  3. 2:23Remove Cutter From Crate
  4. 3:35Unpack Accessories and Screen Assembly
  5. 4:47Media Assembly Installation
  6. 6:56Electrical Inspection
  7. 8:39Catch Basket Installation
  8. 9:30Air Compressor Silencer and Connection
  9. 10:46Air Regulator Adjustment
  10. 12:01Blade Installation
  11. 13:35Electrical Power Connection
  12. 15:25Functional Testing
Written steps 14

Required Tools and Warranty Notice

Watch this part0:00

What you need

  • 17 mm nut driver bit
  • Metric hex screwdriver set
  • Wrench or pliers
  • Drill
  • Hammer
  • Forklift or lift straps
  • Minimum of six people if lifting manually
  1. Store the original crate for at least 6 months to comply with warranty requirements.

Remove Top of Crate

  1. Loosen and remove all top hex screws.
  2. Lift off the top crate panel.
  3. Place all screws and bolts into a box for storage.

Remove Side Panels

Watch this part0:50
  1. Use a wrench or pliers to hold the nut.
  2. Use a drill to loosen the screws around the side panels.
  3. Remove all screws around the crate.
  4. Use a hammer to carefully pop out each side panel.
  5. Remove the top supporting frame.
  6. Remove side panels one by one.
  7. Carefully remove the plastic cover, paying close attention to the screen attachment on the left side.

Remove Cutter From Crate

Watch this part2:23
  1. Remove all accessory boxes from the crate.
  2. Remove the wooden slab pieces.
  3. Lift the cutter off the crate.
  4. Use a forklift if available to prevent damage.
  5. If a forklift is not available, use lift straps.
  6. Use at least six people when lifting manually.
  7. Retract the foot stoppers.

Unpack Accessories and Screen Assembly

Watch this part3:35
  1. Unpack all accessories.
  2. Review all items to confirm nothing is missing.
  3. If any items are missing, contact DTF Station tech support.
  4. Carefully remove plastic wrap from the screen attachment.
  5. Attach the screen assembly to the cutter body.
  6. Inspect all screen and board connections.
  7. Push in any partially loose connectors.
  8. If unsure, leave the screen as-is and contact a DTF Station technician.

Media Assembly Installation

Watch this part4:47
  1. Locate the rounded edge rod.
  2. Insert it into the designated slot.
  3. Loosen screws and attach the media attachment assembly brackets.
  4. Insert all three screws without tightening.
  5. Loosen rod screws.
  6. Slide in the media holding rods.
  7. Center both rods.
  8. Tighten the rod screws without overtightening.
  9. Tighten the bracket screws once rods are secured.

Electrical Inspection

Watch this part6:56
  1. Turn the cutter around.
  2. Open the bottom cover.
  3. Inspect all breaker connections.
  4. Slightly loosen each wire screw.
  5. Push wires in firmly.
  6. Retighten all breaker screws.
  7. Check for any loose wires.
  8. Close the cover.

Catch Basket Installation

Watch this part8:39
  1. Partially loosen the designated screws.
  2. Slide the catch basket brackets into place.
  3. Install the catch basket as shown.

Air Compressor Silencer and Connection

Watch this part9:30
  1. Assemble the air compressor silencer.
  2. Apply plumber’s tape to the valve threads.
  3. Attach the female coupler securely.
  4. Locate the air pipe with the male coupler.
  5. Connect it to the female coupler.
  6. Plug in the power cord.
  7. Release the power button.
  8. Open the air valve.
  9. Verify air pressure exceeds 60 PSI.

Air Regulator Adjustment

Watch this part10:46
  1. Open the backside cover.
  2. Locate the air regulator pressure gauge.
  3. Set pressure to 20 PSI or approximately 0.5 bar.
  4. Release the top black knob.
  5. Turn clockwise or counterclockwise to adjust.
  6. Have a DTF Station technician review settings if needed.

Blade Installation

Watch this part12:01
  1. Locate the blade and blade holders from the accessory box.
  2. Install the blade into the holder as shown.
  3. Verify proper blade exposure by viewing from a straight angle.
  4. Ensure only the blade tip is barely visible.
  5. Avoid excessive blade exposure to prevent belt and blade damage.
  6. Attach the blade holder to the carriage.
  7. Lock it into place.

Electrical Power Connection

Watch this part13:35
  1. Inspect all plug wire connections.
  2. Ensure wires are fully seated.
  3. If necessary, have an electrician inspect wiring.
  4. For 110V versions, connect the two plugs to separate breakers.
  5. Confirm the vacuum connector is on a breaker rated for up to 20 amps.
  6. Plug all cords into outlets.
  7. Release the emergency stop button.
  8. Press the power button.

Functional Testing

Watch this part15:25
  1. Use the screen controls to test left, right, up, and down arrow buttons.
  2. Verify the cutter carriage responds correctly.
  3. Place film or paper on the belt.
  4. Activate the vacuum button.
  5. Attempt to move the film or paper to verify vacuum pressure.
  6. Press the clamp button.
  7. Confirm the clamp lowers to the belt.

Completion

  1. Confirm all functions operate correctly.
  2. Refer to the Quick Start Guide for next steps.
  3. Contact a DTF Station technician to schedule training.

3. How to Setup Driver on DigiRIP

Install Arc 127 Driver in Digital Factory

  1. 0:02Install Printer Driver
  2. 0:55Open Digital Factory and Verify Driver
  3. 1:38Upgrade Cutter Add-On License (If Required)
  4. 2:18Apply Upgrade Code
  5. 3:10Configure Output Port
Written steps 9

Install Printer Driver

Watch this part0:02
  1. Launch the Digital Factory installer.
  2. If prompted for a first-time installation, click Next.
  3. Click Next again.
  4. Click Install Printer.
  5. Select the printer driver.
  6. Choose Universal Controller Driver Plus.
  7. Click OK.
  8. Click Next.
  9. Allow the device packages to download.
  10. Click Next once the download is complete.
  11. Select the TCP/IP port.
  12. Click Next.
  13. Click Finish.

Open Digital Factory and Verify Driver

Watch this part0:55
  1. Open Digital Factory.
  2. Confirm the Universal Controller driver appears in the queue.
  3. Click Devices.
  4. Select Manage Devices.
  5. Click the Install Cutter icon.

Upgrade Cutter Add-On License (If Required)

Watch this part1:38
  1. If the Install Cutter icon is disabled, click Help.
  2. Select Upgrade License.
  3. Enter the cutter add-on upgrade code provided to you.
  4. If no upgrade code is available, confirm whether the cutter add-on was purchased.
  5. Contact your distributor if planning to purchase the cutter add-on.

Locate License File Number

  1. Click Help.
  2. Click About Digital Factory.
  3. Verify the version is Digital Factory 11.
  4. Click More.
  5. Locate the license file number starting with the letter P.
  6. Write down the license file number for your distributor.

Apply Upgrade Code

Watch this part2:18
  1. Return to the Help tab.
  2. Click Upgrade License.
  3. Enter the upgrade code.
  4. Restart Digital Factory if prompted.

Install Arc 127 Cutter

  1. Click Devices.
  2. Select Manage Devices.
  3. Click the Install Cutter icon.
  4. Search for Arc 127.
  5. Select Arc 127.
  6. Click OK.
  7. Click Next.
  8. Click Finish.

Associate Cutter to Queue

  1. Click Q.
  2. Select Manage Queues.
  3. Open the Device drop-down menu.
  4. Select Arc 127.
  5. Click Yes.

Configure Output Port

Watch this part3:10
  1. Open the Port drop-down menu.
  2. If COM options are unavailable, click File.
  3. Select Port Properties.
  4. Set the output folder.
  5. Click the three-dot icon.
  6. Select Desktop or desired folder.
  7. Click OK.
  8. Choose Job Name or prompt for name as the output file option.
  9. Click OK.
  10. Close the window.

Completion

  1. Confirm the Arc 127 driver is installed and associated correctly.
  2. Refer to the Queue Properties video for production markup and advanced cutter add-on settings.

4. How to Import Queue Properties for Prestige XL3

Set Up Arc 127 Queue in DigiRIP

  1. 0:00Open Existing DTF Queue
  2. 0:35Install and Activate Queue
Written steps 3

Open Existing DTF Queue

Watch this part0:00
  1. Open DigiRIP.
  2. Navigate to the XL3 queue.
  3. Confirm this is the standard DTF printing queue.

Import Arc 127 Queue

  1. Locate the queue folder downloaded from Google Drive.
  2. Find the queue file for XL3.
  3. Drag and drop the XL3 Arc 127 queue file into DigiRIP.

Install and Activate Queue

Watch this part0:35
  1. When the queue installation popup appears, click Yes.
  2. Confirm the new Arc 127 queue is installed.
  3. Check whether the queue is active.
  4. If inactive, go to the Main tab.
  5. Click Start/Stop Queue to enable the queue.

5. How to Import Queue Properties for Aries 124

Set Up Arc 127 Queue in DigiRIP (UV DTF)

  1. 0:00Download Arc 127 Queue Files
  2. 0:52Import Arc 127 Queue
Written steps 4

Download Arc 127 Queue Files

Watch this part0:00
  1. Open the Arc 127 Google Drive.
  2. Download the zip file named Arc 127 Q.
  3. Extract the zip file.
  4. Locate the queue files for your specific printer.

Open Existing Printer Queue

  1. Open DigiRIP.
  2. Navigate to the Aries 124 queue.
  3. Confirm this is the regular UV DTF queue.

Import Arc 127 Queue

Watch this part0:52
  1. Open the extracted Arc 127 queue folder.
  2. Select the queue file for Aries 124.
  3. Drag and drop the file into DigiRIP.
  4. When the queue installation popup appears, click Yes.
  5. Confirm the Arc 127 queue is installed.

Activate Arc 127 Queue

  1. Verify the queue is inactive after installation.
  2. Go to the Main tab.
  3. Click Start/Stop Queue to activate the queue.

6. How to Setup Cutter for Printing via USB or Ethernet Cable Connection

Connect Arc 127 Cutter Using USB Flash Drive, USB Cable, or Ethernet

  1. 0:00Locate Connection Accessories
  2. 0:34USB Cable Connection and Windows Driver Installation
  3. 1:21Configure DigiRIP for USB Cable Connection
  4. 2:03Ethernet Cable Connection and Network Setup
  5. 3:12Configure DigiRIP for Ethernet Connection
Written steps 6

Locate Connection Accessories

Watch this part0:00
  1. Locate the cutter accessory box included with the Arc 127.
  2. Remove the USB flash drive.
  3. Remove the USB cable.
  4. Remove the Ethernet cable.

USB Flash Drive Connection (Primary Method)

  1. Use the USB flash drive as the primary connection method for cutting.
  2. Refer to the Arc 127 operation video for detailed USB flash drive cutting instructions.

USB Cable Connection and Windows Driver Installation

Watch this part0:34
  1. Open the USB flash drive or the Arc 127 Google Drive.
  2. Locate the zip file named Arc 127 Windows Driver.
  3. Download and extract the zip file to your device.
  4. Open the setup package.
  5. Click Extract.
  6. Click Next.
  7. Check the license agreement option.
  8. Click Next to continue installation.
  9. Complete the installation to finish driver setup.

Configure DigiRIP for USB Cable Connection

Watch this part1:21
  1. Open DigiRIP.
  2. Locate the Arc 127 queue for your printer.
  3. Go to Q.
  4. Select Manage Queues.
  5. Scroll down to the Arc 127 port settings.
  6. Select COM3 if the driver installed successfully.
  7. Import your files and complete the layout.
  8. Go to Cut Jobs.
  9. When prompted, manually move blade one to the first registration mark.
  10. Return to DigiRIP and click OK.
  11. Allow the cutting process to begin.

Ethernet Cable Connection and Network Setup

Watch this part2:03
  1. Open Windows Settings.
  2. Go to Network and Internet.
  3. Select Ethernet.
  4. Locate the IPv4 address section.
  5. Click Edit.
  6. Set IP settings to Manual.
  7. Turn IPv4 On.
  8. Enter IP address 192.168.0.233.
  9. Set Preferred DNS to 114.114.114.114.
  10. Turn DNS over HTTPS Off.
  11. Save the settings.

Configure DigiRIP for Ethernet Connection

Watch this part3:12
  1. Open DigiRIP.
  2. Locate the Arc 127 queue for your printer.
  3. Go to Q.
  4. Select Manage Queues.
  5. Select TCP/IP as the port type.
  6. Enter IP address 192.168.0.233.
  7. Set protocol to RAW.
  8. Set port number to 9100.
  9. Leave other settings as default.
  10. Click OK.
  11. Import your files and complete the layout.
  12. Manually move blade one to the first registration mark.
  13. Go to Cut Jobs.
  14. Start the cutting process.

7. How to Prepare Cutter for Operation

Pre-Operation Setup for Arc 127 Cutter

  1. 0:00Select Location and Secure Cutter
  2. 0:28Connect and Activate Air Compressor
  3. 0:55Power On Cutter and Initialize
  4. 1:23Install Blade and Blade Holder
  5. 2:04Completion
Written steps 6

Select Location and Secure Cutter

Watch this part0:00
  1. Choose a stationary location for the cutter.
  2. Ensure access to all four sides of the cutter.
  3. Allow a minimum of 2 feet of working space around the cutter.
  4. Once positioned, tighten the four foot stoppers to stabilize the cutter during operation.

Power Requirements

  1. Confirm the cutter has dedicated power.
  2. For 220V versions, use the single plug that powers both the machine and the vacuum.
  3. Ensure the outlet can handle at least 20 amps.
  4. For 110V versions, connect the two plugs to separate breakers.
  5. Confirm the vacuum connector is on a breaker rated for up to 20 amps.
  6. Consult an electrician if needed.

Connect and Activate Air Compressor

Watch this part0:28
  1. Close the air gauge outlet valve by turning it to the side.
  2. Pull the hose lock backward to release it.
  3. Insert the air tube straight into the connector.
  4. Push the hose lock back into place until it clicks.
  5. Gently pull the tube to confirm it is securely fastened.
  6. Connect the air compressor power plug to the machine if using 220V.
  7. If using 110V, connect the air compressor to a separate outlet.
  8. Turn on the air valve.
  9. Pull the power switch to activate the air compressor.
  10. Verify the air compressor pressure gauge is rising.

Power On Cutter and Initialize

Watch this part0:55
  1. Press the cutter power button.
  2. Wait for the initialization process to complete.
  3. Confirm the carriage moves to the front corner.
  4. Verify the main screen appears after initialization.

Install Blade and Blade Holder

Watch this part1:23
  1. Locate the cutter accessory box.
  2. Remove the blade and blade holder.
  3. Wear protective gloves to avoid sharp metal edges.
  4. Remove the blade from the case and sleeve.
  5. Insert the blade into the blade holder.
  6. Set the blade exposure length to approximately 1 mm.
  7. View from a straight angle to confirm the blade tip is barely visible.
  8. Avoid excessive blade exposure to prevent belt damage and premature blade wear.
  9. Attach the blade holder to the carriage.
  10. Lock the blade holder into place.

Completion

Watch this part2:04
  1. Confirm all preparation steps are complete.
  2. Proceed with operating the Arc 127 cutter.

Stuck on a step?

Your authorized dealer and our factory support team answer on Discord — the fastest route to a person who knows this machine.

Get support

Need a person to answer?

Message the DTF Station team in Vietnam on Zalo — Mon–Sat, 8:00–17:00, usually answered the same day. If you need ink, film or powder, ask in the same message.

Chat on Zalo Ask about supplies See equipment