Introduction
Watch this part0:05In this video, you’ll learn how to check your printer queue (Q Port) settings to ensure your printer can properly receive print jobs.
DigiRIPCustomer login
Digrip - How to Correctly Setup your Printer Port
Every step links to its own moment in the video, so you never hunt for the right part again.
How to Check Your Printer Queue Port Settings
Written steps 5
Open Queue Management
Watch this part0:11- Select the printer queue.
- Click “Queue” in the top menu.
- Click “Manage Queues.”
Verify Port Settings
Watch this part0:21- In the queue information dialog box, locate the “Port” section.
- Make sure the port type is set to “TCP/IP” in the drop-down menu.
- Confirm the IP address is set to 127.0.0.1.
- Verify the protocol is set to “Raw.”
- Confirm the port number is set to 9100.
Final Check
Watch this part0:43- Ensure all settings match the values above.
- These settings confirm the local port required for printing is correctly configured.
Completion
Watch this part0:47That’s all for checking your printer queue port settings.
Stuck on a step?
Your authorized dealer and our factory support team answer on Discord — the fastest route to a person who knows this machine.