Overview
Watch this part0:00- This guide explains how to adjust **Chroma** in DigiRIP to enhance color vibrancy.
Color Prime consumablesCustomer login
How to Adjust Chroma Settings to Make the Prints More Vibrant
Every step links to its own moment in the video, so you never hunt for the right part again.
How to Adjust Chroma in DigiRIP
Written steps 4
Adjusting Chroma
- Click **Q Properties**.
- Select **Color Adjust**.
- Go to the **Graphics** section.
- Set **Chroma** to **10** as a starting point.
- Run a test print to evaluate the result.
Fine-Tuning Chroma
- If additional color saturation is needed: Gradually increase the Chroma value.
- Do not exceed a value of **15**.
- Test prints after each adjustment to avoid oversaturation.
End of Guide
This completes the process for adjusting chroma in DigiRIP.
Stuck on a step?
Your authorized dealer and our factory support team answer on Discord — the fastest route to a person who knows this machine.
Need a person to answer?
Message the DTF Station team in Vietnam on Zalo — Mon–Sat, 8:00–17:00, usually answered the same day. If you need ink, film or powder, ask in the same message.