How to Change image sizes on Digital Factory

1. This guide covers three common layout tasks in Digital Factory: Changing image size

• Creating copies
• Adjusting margins

1. Open **Digital Factory**.
2. Go to **Devices**.
3. Select **Quick Test Print**.
4. While it loads, go to **Devices** again.
5. Click **Print Test Page**.
6. Select a queue (example shown: **My Art – Black Shirt**).

1. Click on the first job loaded (example: **CMYK Test Page**).
2. Locate the **Print Size** controls.
3. Set the width to **5 inches**.
4. Adjust height as needed.
5. Enable **Maintain Ratio** to preserve proportions.
6. The nesting feature will automatically reposition the job in the media preview.

1. Click on the second file (example: **My Art – Black Shirt**).
2. Set the width to **5 inches**.
3. Enable **Maintain Ratio**.
4. The image will resize to a square if applicable.

1. Select the image you want to duplicate.
2. Locate the **Copies** section.
3. Adjust the number of **Columns**.
4. Adjust the number of **Rows** as needed.
5. Copies will populate automatically in the preview.

1. Locate the **Margins** settings.
2. Increase margins to create spacing between graphics.
3. This spacing allows designs to be easily cut or segmented after printing.
4. Adjust margins as needed based on your workflow.

1. Increase columns or rows to add more images.
2. Adjust total image quantities as needed.
3. The media preview updates in real time as changes are made.

This completes the process for resizing images, creating copies, and adjusting margins in Digital Factory.