How to Use Neostampa (Basic Operation)

This guide covers the basic operation of the NeoStampa RIP software, from launching the program to sending a print job. Launching NeoStampa

1. Confirm you have already watched the NeoStampa installation video.
2. Click the **Windows** icon.
3. Search for **NeoStampa**.
4. Double-click to open the software.

1. Right-click the NeoStampa icon.
2. Select **Pin to taskbar** for quick access. Creating a Job

1. Click **New Job**.
2. Select your **Printer**.
3. Select your **Scheme**.
4. Click **OK**. Importing & Adjusting Images

• Example: Prestige R2 Pro with 720 × 800 scheme.

1. Click **Add File**.
2. Import images using one of the following: Single file selection.

• Multiple files by holding **Ctrl** while selecting.

1. Select an oversized image.
2. Adjust the scaling controls at the top.
3. Resize until the image fits within print limits.

1. If the image extends beyond print bounds (red zone), click the **Rotate** icon.
2. Confirm the image now fits within the print area.

1. Select the image.
2. Click **Copy**.
3. Click **Paste**.
4. Repeat as needed. Nesting & Printing

1. Click the **Nest** icon.
2. Set **Minimal Separation** to **0.25 in**.
3. Click **OK**.
4. Images will auto-align to reduce media waste.

1. Click the **Print** icon (top or bottom-right).

1. In the print dialog, confirm **TCP/IP Port** is selected.
2. If not: Click **Configure**.
3. File connection is optional, but TCP/IP is recommended for direct printing.

• Select **TCP/IP Port**.

• Options vary based on system performance.
• If your computer has low RAM or slower performance:
• Processing may be affected.
• Recommended setting:
• **Process and send simultaneously**.

1. Click **Print**.
2. Confirm the job appears in the queue. Troubleshooting Notes

Basic NeoStampa operation is now complete.

• If an error appears under **Status**:
• NeoStampa cannot communicate with the Pilot software.
• Ensure **Pilot** is open and shows a **green indicator light**.
• If issues persist, contact **DTF Station Technical Support**.