VTG 2026 Meet us at VTG 2026 — Booth A560, SECC Ho Chi Minh City, 14–17 October Booth A560 · 14–17 Oct Book a meeting ›

Miro 36Customer login

Miro 36 - Maintenance Guide

Every step links to its own moment in the videos, so you never hunt for the right part again.

  • 21 steps
  • 77 instructions
  • 3 videos
  • 3 chapters
  • Updated 2026-02-17

End-of-Day

Miro 36 Shaker - Daily Maintenance Guide

  1. 0:08Required Tools and Preparation
  2. 1:05Heating Chamber Cleaning
  3. 2:15Filter and Fan Cleaning
  4. 3:47Powder Station and Sensor Cleaning
  5. 4:54Powder Tray Handling
  6. 5:23Reassembly and Final Steps
  7. 6:07Completion
Written steps 8

Required Tools and Preparation

Watch this part0:08

What you need

  • Gloves
  • Isopropyl alcohol (90% or higher)
  • Lint-free cloth
  • Brush

Cooling and Safe Shutdown

  1. Turn off all power except the purifier fan.
  2. Open the powder station cover and the main heating chamber cover.
  3. Allow the purifier fan to run for at least 5 minutes.
  4. Wait until the main heating plate temperature drops to room temperature.
  5. Turn off the purifier fan.
  6. Push the control panel in.
  7. Turn off the main power.

Heating Chamber Cleaning

Watch this part1:05
  1. Brush off any powder on the main heating plate.
  2. Use a lint-free cloth with 90% or higher isopropyl alcohol to wipe the main heating plate.
  3. Do not use rubbing alcohol.
  4. Wipe surrounding surfaces inside the heating chamber.
  5. Clean the upper cover area to remove excess powder or debris.
  6. Close and lock the main heating chamber cover.

Filter and Fan Cleaning

Watch this part2:15

What you need

  • Filters should still be replaced monthly despite daily rotation
  1. Open the filter cover.
  2. Clean the filter cover.
  3. Wipe the upper fan area, including the bottom of the cover and the fan position.
  4. Remove all HEPA and charcoal filters.
  5. Place filters in a cool, ventilated area to dry.
  6. Wipe all filter housing surfaces to remove powder and debris.
  7. Install the spare purifier filter included with the Miro 36.
  8. Rotate filters daily to extend filter life.
  9. Ensure the charcoal filter side faces upward when installing.
  10. Close the filter cover.
  11. Close and lock the upper fan cover.

Powder Station and Sensor Cleaning

Watch this part3:47
  1. Open the powder station cover.
  2. Remove the media wheel rod.
  3. Use a brush to remove excess powder inside the powder station.
  4. Clean around the sensor carefully.
  5. Do not scratch the sensor with the brush.
  6. Gently wipe the sensor face using a lint-free cloth and isopropyl alcohol.

Powder Tray Handling

Watch this part4:54

What you need

  • Protect powder from air, moisture, and dust
  • Powder shelf life is 1 year
  • Do not leave powder in the tray after use
  • Store used powder separately from new powder
  • Gradually mix used powder with new powder for future use
  1. Remove the powder tray at the bottom of the machine.
  2. Pour the powder into a sealed container.
  3. Clean excess powder accumulated under the powder collection tray.
  4. Sweep collected powder into the powder tray.

Reassembly and Final Steps

Watch this part5:23
  1. Reinstall the powder tray.
  2. Lower the front heating plate.
  3. Insert the media wheel rod.
  4. Close the powder station cover.
  5. Cover the Miro 36 with the provided fabric cover.

Completion

Watch this part6:07

What you need

  • Daily maintenance completed
  • Machine protected from dust and debris
  • Ready for next operation cycle

Weekly

Miro 36 Shaker - Weekly Glycerin Catch Tray Cleaning

  1. 0:00Required Tools and Preparation
  2. 0:38Removing the Glycerin Catch Trays
Written steps 6

Required Tools and Preparation

Watch this part0:00

What you need

  • Gloves
  • Isopropyl alcohol
  • Lint-free cloth

Weekly Maintenance Overview

What you need

  • This procedure is performed in addition to daily maintenance
  • Designed to prevent glycerin buildup and dust accumulation

Removing the Glycerin Catch Trays

Watch this part0:38
  1. Locate the glycerin catch trays on both sides of the Miro 36.
  2. Loosen the screws securing each tray.
  3. Carefully remove both trays from the machine.

Cleaning the Trays

  1. Use isopropyl alcohol and a lint-free cloth to clean each glycerin catch tray thoroughly.
  2. Remove all glycerin residue and debris.
  3. Allow the trays to dry completely before reinstallation.

Reinstallation and Shutdown

  1. Reinstall the glycerin catch trays on both sides of the machine.
  2. Secure the trays by tightening the screws.
  3. Close all covers.
  4. Unplug the power cable.
  5. Cover the machine with the provided black cover to protect it from dust and debris.

Completion

What you need

  • Weekly glycerin catch tray cleaning completed
  • Machine protected and ready for next use

As Needed

Miro 36 Shaker – Filter Replacement and Purifier Fan Maintenance (As Needed / Monthly)

  1. 0:00Tools and Maintenance Overview
  2. 0:39Power Down and Access Purifier Chamber
  3. 3:49HEPA and Charcoal Filter Replacement
  4. 5:05Side Air Filter Replacement
Written steps 7

Tools and Maintenance Overview

Watch this part0:00

What you need

  • Gloves
  • Isopropyl alcohol
  • Lint-free cloth
  • Screwdriver
  • New side air filters
  • New HEPA / charcoal filters
  • This maintenance is performed as needed
  • Filters are recommended to be replaced monthly for safety
  • Perform this in addition to daily and weekly maintenance

Power Down and Access Purifier Chamber

Watch this part0:39
  1. Turn off the main power to the Miro 36.
  2. Open the purifier chamber lid.
  3. Locate the purifier fan brackets.

Purifier Fan Cleaning

  1. Use a screwdriver to remove the fan brackets.
  2. Carefully remove each fan.
  3. Clean glycerin residue from the fan surfaces using isopropyl alcohol and a lint-free cloth.
  4. Repeat this process for all purifier fans.
  5. Reinstall each fan, ensuring: Proper alignment
  6. Reattach the fan brackets securely.
  7. Turn on the purifier fan briefly to confirm proper operation.
  8. Turn the purifier fan back off after testing.
  • Labeled side faces upward

HEPA and Charcoal Filter Replacement

Watch this part3:49
  1. Lift and remove the fan cover plate.
  2. Remove the old HEPA/charcoal filters.
  3. Install new filters, ensuring: White side faces downward
  4. Reinstall the fan cover plate.
  • Gray side faces upward

Cotton Fabric and Lid Cleaning

  1. Remove the white cotton fabric from the purifier chamber lid.
  2. Use a lint-free cloth with isopropyl alcohol to clean grease buildup on the back of the lid.
  3. Allow the surface to dry.
  4. Reattach the cotton fabric.
  5. Repeat cleaning for any remaining applicable areas inside the chamber.

Side Air Filter Replacement

Watch this part5:05
  1. Remove the side air filters from the machine.
  2. Install new side air filters, ensuring: White side faces outward
  3. Repeat the process for the opposite side.
  • Gray side faces inward

Reassembly and Shutdown

What you need

  • Fans cleaned and tested
  • HEPA/charcoal filters replaced
  • Cotton fabric cleaned and reinstalled
  • Side air filters replaced
  • Machine safely powered down and covered
  1. Close the purifier chamber lid.
  2. Secure all latches.
  3. Unplug the power cord.
  4. Cover the machine with the provided black fabric cover to protect it from dust and debris.

Stuck on a step?

Your authorized dealer and our factory support team answer on Discord — the fastest route to a person who knows this machine.

Get support