Prestige L2 & XL2Customer login

Prestige L2 & XL2 - How to Change Wiper Blade

Every step links to its own moment in the video, so you never hunt for the right part again.

  • 5 steps
  • 17 instructions
  • 1 video
  • Updated 2026-04-20

Wiper Blade Deep Cleaning or Replacement Procedure

  1. 0:00Safety Disclaimer and Required Tools
  2. 0:50Cleaning or Replacing the Wiper Blade
  3. 2:12Reinstalling the Wiper Blade Assembly
Written steps 5

Safety Disclaimer and Required Tools

Watch this part0:00

What you need

  • Screwdriver
  • Lint-free cloth
  • New wiper blade (if replacing)
  1. Do not perform this procedure unless directly instructed to do so by a technician.

Printer Preparation

  1. Power off the printer.
  2. Open the printer cover.
  3. Unlock the printer carriage by rotating the carriage lock knob.
  4. Move the carriage out of the way to access the wiper blade assembly.

Removing the Wiper Blade Assembly

  1. Use a screwdriver to loosen the two screws securing the wiper blade assembly.
  2. Slide the wiper blade assembly out of its slot.
  3. Remove the three screws holding the rubber wiper blade to the holder.
  4. Separate the wiper blade from the holder.

Cleaning or Replacing the Wiper Blade

Watch this part0:50
  1. Use a lint-free cloth to clean the metal brackets.
  2. Clean the existing wiper blade thoroughly if reusing it.
  3. Alternatively, replace the old wiper blade with a new one.
  4. Clean the area where the wiper blade sits, as excess ink can accumulate there.

Reinstalling the Wiper Blade Assembly

Watch this part2:12
  1. Reinsert the rubber wiper blade into the bracket, noting the correct blade orientation.
  2. Attach the L-shaped bracket and secure it using the three screws.
  3. Slide the assembled wiper blade back into its slot.
  4. Tighten the two screws to secure the wiper blade assembly in place.

Stuck on a step?

Your authorized dealer and our factory support team answer on Discord — the fastest route to a person who knows this machine.

Get support

Need a person to answer?

Message the DTF Station team in Vietnam on Zalo — Mon–Sat, 8:00–17:00, usually answered the same day. If you need ink, film or powder, ask in the same message.

Chat on Zalo Ask about supplies See equipment