Prestige L2 & XL2Customer login

Prestige L2 & XL2 - How To Store The Print Head

Every step links to its own moment in the video, so you never hunt for the right part again.

Printhead Storage Procedure for Prestige L2 and XL2 DTF Printers

Written steps 6

Confirm this procedure is being performed only with Level 3 Tech Support guidance or recommendation.
Verify the printer models applicable are Prestige L2 and Prestige XL2.

What you need

Pour a small amount of cleaning solution into one clean cup.
Run the cleaning solution through a disk filter to remove contaminants.
If unsure how to filter the solution or if a disk filter is unavailable, contact DTF Station support for assistance.
Lightly microwave the cleaning solution until it is warm to improve cleaning effectiveness.
Ensure the cleaning solution is warm only and not hot.

Draw the filtered cleaning solution into the syringe.
Connect the ink tube securely to the printhead.
Push the ink tube fully into the printhead to ensure a solid connection.
Slowly press the syringe to push cleaning solution through the printhead.
Use the second clean cup to catch the cleaning solution as it exits the printhead.
Apply firm but gentle pressure to avoid damaging the printhead.
Repeat this process for every channel on the printhead to ensure thorough cleaning.

Use a lint-free cloth to gently remove excess cleaning solution from the printhead.
Do not wipe the face or bottom of the printhead.
Clean only the top of the printhead to remove remaining liquid.
Use a cleaning swab to carefully clean the top of the printhead to remove any remaining ink residue.

Stuck on a step?

Your authorized dealer and our factory support team answer on Discord — the fastest route to a person who knows this machine.